Boarding Fixing Essentials

50mm Flooring screws are designed to fix down both the 18mm and 22mm TG4 boards. They come with a fast cutting tip designed for fibre cement, self countersinking head for fast install and provide a solid and structural fixing for the the NoMorePly...

This polyurethane adhesive offers a 30 minute set time. When installing the 22 and 18mm TG4 Flooring system it is important to allow enough time to move the boards into place before the glue sets. It comes in a 600ml foil and will supply enough gl...

The 35mm NoMorePly Stainless Steel washers are perfect for use with all thicknesses of NoMorePly Light Weight Insulation board. The 35mm diameter provides a base for the screw head, stopping it pulling through the baords....

This polyurethane adhesive offers a 30 minute set time. When installing the 22 and 18mm TG4 Flooring system it is important to allow enough time to move the boards into place before the glue sets. It comes in a 600ml foil and will supply enough gl...

The Mega Strength Tile Backing Board Adhesive is a crucial part of our NoMorePly system and is designed for use when installing the 6/12mm NoMorePly boards onto walls and floors.It sets in just 5 minutes and has a water ...

A Latex based waterproof primer. It is used to seal the surface of NoMorePly boards to improve the bonding strength of the tile adhesive. It helps to reflect heat which enhances the insulation value of NoMorePly to make it ideal for use with under...

NoMorePly Fibre Cement board screws are the perfect fixing method for the 12mm boards. Their unique self-tapping tip and self-countersinking head mean they’re not only fast to install but sit completely flush with the surface of the board. Their h...

The STS External Render board screw is a high-performance screw designed specifically for use with our 12mm STS Construction Board. When installing our Render boards it is important to ensure the screws used are flush, strong and suitable for high...

Designed for fast accurate cutting of Cement and MGO Boards. Diamond tipped teeth which increase blade life and ensure a clean cut every time. Designed to reduce dust. Wherever possible, use a dust extractor with a suitable filter. Always use in a...

The Mega Strength Tile Backing Board Adhesive is a crucial part of our NoMorePly system and is designed for use when installing the 6/12mm NoMorePly boards onto walls and floors.It sets in just 5 minutes and has a water ...

The Mega Strength Tile Backing Board Adhesive is a crucial part of our NoMorePly system and is designed for use when installing the 6/12mm NoMorePly boards onto walls and floors.It sets in just 5 minutes and has a water ...

The Mega Strength Tile Backing Board Adhesive is a crucial part of our NoMorePly system and is designed for use when installing the 6/12mm NoMorePly boards onto walls and floors.It sets in just 5 minutes and has a water ...

STS ISA462 is a fire rated in-tumescent sealant and adhesive Ideal for use with concrete, masonry and STS construction boards and allows for up to 4 hours fire resistance.   x 60...

STS ISA462 is a fire rated in-tumescent sealant and adhesive Ideal for use with concrete, masonry and STS construction boards and allows for up to 4 hours fire resistance.   x 24...

STS ISA462 is a fire rated in-tumescent sealant and adhesive Ideal for use with concrete, masonry and STS construction boards and allows for up to 4 hours fire resistance.   x 12...

This polyurethane adhesive offers a 30 minute set time. When installing the 22 and 18mm TG4 Flooring system it is important to allow enough time to move the boards into place before the glue sets. It comes in a 600ml foil and will supply enough gl...

This polyurethane adhesive offers a 30 minute set time. When installing the 22 and 18mm TG4 Flooring system it is important to allow enough time to move the boards into place before the glue sets. It comes in a 600ml foil and will supply enough gl...

NoMorePly Fibre Cement board screws are the perfect fixing method for the 12mm boards. Their unique self-tapping tip and self-countersinking head mean they’re not only fast to install but sit completely flush with the surface of the board. Their h...

The 35mm NoMorePly Stainless Steel washers are perfect for use with all thicknesses of NoMorePly Light Weight Insulation board. The 35mm diameter provides a base for the screw head, stopping it pulling through the boards.   x10 Box's...

The Mega Strength Tile Backing Board Adhesive is a crucial part of our NoMorePly system and is designed for use when installing the 6/12mm NoMorePly boards onto walls and floors.It sets in just 5 minutes and has a water ...

Designed for fast accurate cutting of Cement and MGO Boards. Diamond tipped teeth which increase blade life and ensure a clean cut every time. Designed to reduce dust. Wherever possible, use a dust extractor with a suitable filter. Always use in a...

Designed for fast accurate cutting of Cement and MGO Boards. Diamond tipped teeth which increase blade life and ensure a clean cut every time. Designed to reduce dust. Wherever possible, use a dust extractor with a suitable filter. Always use in a...

STS ISA462 is a fire rated in-tumescent sealant and adhesive Ideal for use with concrete, masonry and STS construction boards and allows for up to 4 hours fire resistance....