The Mega Strength Tile Backing Board Adhesive is a crucial part of our NoMorePly system and is designed for use when installing the 6/12mm NoMorePly boards onto walls and floors.
It sets in just 5 minutes and has a water free formulation, ensuring that it doesn’t foam excessively but it will expand to fill any small gaps beneath the boards. As it is 100% waterproof, it is an excellent jointing solution in all areas including bathrooms and wetrooms.
Polyurethane adhesive is recommended for fixing NoMorePly boards in conjunction with NoMorePly screws. It gives an exceptionally high bond strength and foams slightly on application to fill small gaps.
It can be applied to damp surfaces and has excellent weathering characteristics. The adhesive adheres to a wide range of surfaces – most metals and a wide variety of wood, including engineered timber. It can be applied on both vertical and horizontal surfaces, due to its non-drip properties. When applied, the adhesive is clear allowing the applicator to see guidelines, then it cures to white. The adhesive has a surface temperature range of -30 to 150⁰C. It doesn’t soften at higher temperatures like a SB contact type adhesive would. It is solvent free, and resistant to chemicals.
| COLOUR | Gels: Translucent;Liquid: Caramel/brown |
|---|---|
| CONTENTS | 100% prepolymers and calalyst (solvent free) |
| SOLIDS | 100% (solvent free) |
| VISCOCITY | 200 x10′ mpas (bfld RVT sp7 5rpm) (gel) |
| COVERAGE | 400g/m2 |
| INITIAL SET TIME | 5 or 30 minutes, depending on product |
| FLASH POINT | N/applicable |
| CLEANER | Acetone BEFORE Curing. After cure, use mechanical abrasion. |
The Mega Strength Tile Backing Board Adhesive is a crucial part of our NoMorePly system and is designed for use when installing the 6/12mm NoMorePly boards onto walls and floors.
It sets in just 5 minutes and has a water free formulation, ensuring that it doesn’t foam excessively but it will expand to fill any small gaps beneath the boards. As it is 100% waterproof, it is an excellent jointing solution in all areas including bathrooms and wetrooms.
Polyurethane adhesive is recommended for fixing NoMorePly boards in conjunction with NoMorePly screws. It gives an exceptionally high bond strength and foams slightly on application to fill small gaps.
It can be applied to damp surfaces and has excellent weathering characteristics. The adhesive adheres to a wide range of surfaces – most metals and a wide variety of wood, including engineered timber. It can be applied on both vertical and horizontal surfaces, due to its non-drip properties. When applied, the adhesive is clear allowing the applicator to see guidelines, then it cures to white. The adhesive has a surface temperature range of -30 to 150⁰C. It doesn’t soften at higher temperatures like a SB contact type adhesive would. It is solvent free, and resistant to chemicals.
| COLOUR | Gels: Translucent;Liquid: Caramel/brown |
|---|---|
| CONTENTS | 100% prepolymers and calalyst (solvent free) |
| SOLIDS | 100% (solvent free) |
| VISCOCITY | 200 x10′ mpas (bfld RVT sp7 5rpm) (gel) |
| COVERAGE | 400g/m2 |
| INITIAL SET TIME | 5 or 30 minutes, depending on product |
| FLASH POINT | N/applicable |
| CLEANER | Acetone BEFORE Curing. After cure, use mechanical abrasion. |
Technical Data Sheet